SATA 7p/M Solder Type Wire to Board Connector

I. Basic overview
SATA 7P/M Solder Type Wire to Board Connector, 7-pin M design solder type wire to board connector.
Application: Widely used in solid-state hard disk (SSD), mechanical hard disk (HDD), optical drive and other storage devices and computer motherboard, server motherboard or other electronic equipment connection, to achieve efficient and stable data transmission.

II. product characteristics
1. High-speed transmission:
Support SATA interface high-speed data transmission features, providing stable and efficient data transmission rate. With the upgrade of the SATA standard (such as SATA 2.0, SATA 3.0, etc.), the connector can support higher data transmission speeds to meet the increasing data transmission needs.
2. Hot Swap support:
Allows storage devices to be connected or disconnected while the system is running, without shutting down the system, improving the flexibility and efficiency of data transfer. This is especially important when storage devices need to be frequently replaced or upgraded.
3. Compact design:
Compared to traditional parallel ATA (PATA) connectors, SATA connectors have a smaller size and fewer pins, helping to save space inside the device, making wiring more compact and flexible.
4. Stable and reliable:
Using differential signal transmission technology, with strong anti-interference ability, to ensure the stability and reliability of data transmission. At the same time, the connection mode of welding wire to the plate also enhances the stability of the connection.
5. Strong compatibility:
It has good compatibility and can connect SATA storage devices of different manufacturers and models, which is convenient for users to use and maintain.

III. Technical specifications
Pin count: 7 pins
Interface type: M type (usually refers to connection terminals with a specific shape and size to ensure the stability and accuracy of the connection)
Connection method: welding wire to board (by welding the connector is fixed on the circuit board to achieve the connection with the wire)
Electrical performance: including voltage rating, current rating, contact resistance, insulation resistance and other parameters, the specific value should be determined according to the product specification.
Physical size: includes dimensional information such as the height, width, and depth of the connector, as well as detailed parameters such as pin spacing and pin length.

IV. Application scenarios
Mainly used in computer motherboard, server motherboard, industrial control equipment, embedded system and other fields, as a key connection between the storage device and the motherboard.

V. Precautions
During use, ensure that the connector is correctly connected to the device to avoid signal transmission problems caused by poor contact.
Pay attention to the use of the connector environment, avoid the use of humid, high temperature or strong electromagnetic interference environment, to ensure the stability and reliability of data transmission.
During the welding process, follow the relevant welding process requirements to ensure the welding quality and avoid damage to the connector.

Company Introduction：

Our company is a connector manufacturer integrating R&D, production and sales. Our main products include high-speed PCIE4.0/5.0 series SATA connectors, USB2.0, USB3.0 series, Micro-B, Micro-B waterproof series, SIM card TF card series, Type-C, Type-C waterproof series, HDMI series, wire-to-board series, SATA series, shortcut terminals, SATA wiring harness, computer peripheral cables, server internal wiring, HDMI and USB3.0, TYPE-C wiring harness, new energy vehicle charging guns, adapters and Cables and so on! Products are widely used in computers, communications, automobiles, medical and electrical equipment.

We have our own independent production plant and independent laboratory; the factory covers an area of 25,000 square meters, the production workshop area is 40,000 square meters, and we have more than 800 employees. It has complete mold development and processing equipment (including Seibu wire cutting, Japanese WAIDA optical grinding, Mitsubishi spark machines, Taiwan high-speed CNC, Yuqing precision grinders, etc.); it has production equipment: 40 high-speed precision punches, 45 imported precision injection molding machines machines, 120 automatic assembly machines and self-developed connector and cable assembly machines. With the strong support of these equipment, the company's monthly production capacity can reach 2 million cables, 30 million connectors, and stamping and injection molding OEM parts processing with an output value of more than 800,000. The current main customers include Foxconn, Dell, Asus, Amphenol, Amphenol FCI, BYD, Tyco, DELL, IBM, MOLEX、LUXSHARE, MGE, Lenovo, WIESON, Chunghsin, Emdoor etc. etc.

Since its establishment, the company has taken “high starting point, high efficiency, high quality, high requirements” as its corporate purpose. All decisions are based on quality and operate in strict accordance with the IS09001 quality control system and ISO14001 environmental certification system. In line with the corporate philosophy of “customer first, honest service, and sustainable operation”, the company relies on excellent quality and strong pre-sales and after-sales services, based on a wide range of domestic and foreign markets, and has established good cooperative relationships with domestic and foreign customers. This enables the company to develop rapidly and steadily.