1200mAh Bobbin Type No Passivation Effect Wide Temperature Range Primary ER14250 Lithium Battery

ELECTRICAL CHARACTERISTICS

Open circuit voltage (at 23±2°C) 3.65V

Nominal capacity 1200mAh

(At+25°C, battery discharged at continuous current 0.65mA until voltage reaches cut-off voltage 2.0V. The capacity can vary at different temperature, discharge current or cut-off voltage. )

Maximum continuous current 40mA

(At+25°C, 2.0V cut-off, battery discharged for minimum 50% of nominal capacity. )

Maximum pulse discharge current 80mA

(At+25°C, 2.0V cut-off, battery discharged for minimum 50% of nominal capacity with max pulse for 3 seconds after 27 seconds break. The discharged capacity may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult HCB.)

Storage (recommended) ≤30°C & ≤75%RH

(For more severe conditions, consult HCB)

Operating temperature range -60°C ~ +85°C
(Operation above ambient temperature may lead to reduced capacity and lower voltage readings at the beginning of pulses. Consult HCB)

APPLICATIONS

Utility metering

Electricity, gas, water, heat, calorimeters; heat cost allocators; automatic meter reading; prepayment meters

Tracking

Electronic toll collection; data loggers; On-board units; trucks, containers, trailers; animals; personal

Automotive

Tire pressure monitoring systems; engine controllers; brake controllers; in-car computers; digital tachographs; belt straighteners

Alarm and security systems

Wireless alarms PIR; sensors/detectors; electronic safes; encryption systems

Industrial automation

Controllers; fault detectors; process logic control; Industrial PC’s

Office automation

Point of sale terminals; cash machines; telephone key systems; telephone exchange boards

Instrumentation

Electronic scales; vending machines; gambling machines; taximeters

Medical

Dispensers; implantable devices; infusion pumps

Off-shore

Beacons; buoys; oil drilling/MWD; life jacket lights

High end consumer

Ultral thin soft pack batteries, customized batteries

PHYSICAL CHARACTERISTICS

Diameter (max) 14.5mm

Height(max) 25.0mm

Typical weight 10.0g

Lithium metal content 0.35g

WARNING:

● Do Not Short Circuit ● Do Not Recharge ● Do Not Puncture ● Do Not Crush
● Do Not Dismantle ● Do Not Incinerate ● Do Not Mix New and Used Batteries ● Do Not Heat Above 100°C

HCB Battery Co., Ltd. was founded in 2001. As a leading primary lithium battery manufacturer and solution provider in China, HCB remains dedicated to leading the R&D and manufacturing of various types of primary lithium batteries.

With every improvement that is made, HCB continues to pursue perfection. Technological development & innovation are of great importance to HCB. We have been focusing on providing reliable products & services to the customers worldwides for more than 23 years.

Utility Metering
Automatic meter reading(AMR), advanced metering infrastructure(AMI),electricity meters, gas meters, water meters, heat meters, etc.

Security
Smoke detectors,0. security alarms, seismometers, digital door lock system, etc.

Internet of Things
Asset tracking toll-gate transponders smart home bike-sharing IC cards GPS, TPMS, RFID, etc.

Monitoring
Animal health monitoring system,forest fire alert, smart irrigation system, etc.

Medical Devices
Cardiac pacemaker, respirator, oxygenator, inspection devices, monitoring devices, infusion pump, etc.

Marine & Lifesaving
Life jacket, signal light, buoy, etc.

Oil & Gas
Well pressure meters, float meters, logging while drilling(LWD), measure while drilling(MWD), etc.

Military & Defence
Portable radio communications, night vision equipment & thermal images, torches & lamps, etc.

Our products have exported worldwide and won the trust of all, we are striving for the credibility and honor of MADE IN CHINA products.

As a company seeking perfection continuously, we have strict requirements for management. The company has been awarded with OHSMS18000, ISO9001 international quality management system certificate and ISO14000 environmental management system certification. At the same time, as a company present in the extensive international market, HaoCheng has also received the CE product safety certification in EU to ensure the safety of our products exported to EU. Besides, HaoCheng has also been awarded with RoHS environmental certification in EU. Our products have passed the test for hazardous substances, thus proving the environmental features of the products. Meanwhile, because the international market has very critical requirements for shipping, we have been awarded with the UN safe shipping certification of US. Besides, our products have also received the UL American products access certification, which is necessary for all products to enter markets in developed nations such as US.

We have the automatic equipment taking the leading position in China, the fully-automatic lithium manganese coilers (the most in China), lithium automatic production line and laser welder imported from Germany (we used to be the sole Chinese producer having the equipment. Only in recent years, our Chinese competitors began to import such equipment). The price of this laser welder is equivalent to that of a whole
lithium automatic production line. We have invested heavily to buy it because the laser welder only spends 0.7 seconds to weld one battery. It is well known that the ordinary argon arc welder takes a longer time (about 4 seconds). At the same time, the high temperature in the welding would impact on the internal structure in the battery. However, the laser welding greatly reduces the time of heat conducting, thus reducing the
impact on the battery quality in the process of welding. At the same time, the highly-automatic production equipment considerably improves the consistency of batteries, thus ensuring the batch supply of products.

HaoCheng Industrial Park has the professional solutions to stand-by emergency power source. By taking our own advantages, we can guarantee the constant supply of power in critical moments. We have designed IDC-level (data center) emergency stand-by power source solutions for the factory, which is equipped with the self-produced Super Power 530kw diesel power generating unit. In the early stage of factory design, we use the 1+1 double transformer configuration to ensure the constant power supply for production at high cost. As is known to all, dry environment is very important in the process of manufacturing lithium batteries. The moisture will impact on the quality of batteries.

HaoCheng Industrial Park is equipped with 3+1 independent drying and moisture-eliminating system and lithium manganese, lithium thionyl and soft package sets. When one machine breaks down, the battery production will not stop. The drying and moisture-eliminating system of the original HaoCheng company has now become the spare part in the Industrial Park to ensure the lithium battery production is always done

in the wonderful dry environment.

With Experience of 24Years
And Wisdom of 600 Persons
We Do only One Thing