
ER17335 + UPC1520 , a lithium primary battery pack instead of spiral cell
Nominal Capacity | 2200mA |
Battery discharged at continuous current 1.1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ | |
Nominal Voltage | 3.6V |
Maximum Continuous Current | 80mA |
Battery with minimum 50% rated capacity discharged atambient temperature 23±2℃ | |
Maximum Pulse Discharge Current | 160mA |
Battery with minimum 50% rated capacity discharged at maxpulse for 3 seconds after 27seconds break. Ambient temperature23±2℃ | |
Storage Condition | Temperature ≤ 30℃ Humidity ≤ 75%RH |
Operating Temperature | -55℃ to +85℃ |
Battery Dimension | See drawing on pag |
Max Weight | 21.0g |
Self-discharge Rate | 2% |
Max self-discharged rate at ambient temperature 23±2℃ | |
Shelf Life | 10 years |
Ambient temperature 23±2℃ |
1. Battery Characteristic
An auxiliary battery capacitor providing large pulse current.
The combination of UPC and lithium SOCl2 bobbin battery is more safety, and the combination can provide large discharge current. It’s a good choice to replace spiral battery.
Low resistance, high power density, suitable for high current pulse;
Long life, using pulse cycle count up to 100000 times;
Good low temperature performance, wide temperature range from 40 ℃ to + 70 ℃;
Good safety performance.
We provide the rated voltage is 3.6V, the working voltage varies with the load, generally between 3.3V ~ 3.6V
We offer the specific energy density of 377Wh/kg
Battery working temperature range from -55℃ to +85℃
Battery voltage is very stable during work, more than 90% of the capacitycould be outputon a fixed high voltage platform
Under thecondition of normal temperature, the battery self -discharge rate of no more than 2% per year
Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
2. The working principle of UPC
Lithium SOCl2bobbin battery and UPC in parallel, high load of pulse completed by the Ultra Pulse Capacitor, not affected by the passivation.High load pulse bycompleted UPC, ahead of the next pulse lithium battery recharge UPC, after a full charge the discharge capacity ofUPC is constant, so on, until the battery capacity is completely consumed. In this way, we can guarantee the battery packa long life under the high load capacity.
3. Product application areas
4. FAQS of General Safety Instructions
In order to store the battery, the environment should be dry enough.
We need to stop using the battery when the abnormal heat release or leakage occurs.
The battery should be kept out of the children firstly. If swallowed by children, please contact a physician at once.
The batteries may be incinerated or mutilated if they are closed to the fire and it leads a possible burst or they may release the toxic materials.
They will be hot very fast and can lead the gas and other toxic materials leakage if they are closed to fire.
If + and - polarity of battery is directly connected, it is called short circuit and it will lead the leakage of gas or materials or a violent rupture.
The batteries are not able to be thrown into the water. This can cause the water explosion.
HCB Battery Co., Ltd
HCB Battery Co., Ltd. was founded in 2001. As a leading primary lithium battery manufacturer and solution provider in China, HCB remains dedicated to leading the R&D and manufacturing of various types of primary lithium batteries.
With every improvement that is made, HCB continues to pursue perfection. Technological development & innovation are of great importance to HCB. We have been focusing on providing reliable products & services to the customers worldwides for more than 23 years.
Utility Metering
Automatic meter reading(AMR), advanced metering
infrastructure(AMI),electricity meters, gas meters, water meters,
heat meters, etc.
Security
Smoke detectors,0. security alarms, seismometers, digital door lock
system, etc.
Internet of Things
Asset tracking toll-gate transponders smart home bike-sharing IC
cards GPS, TPMS, RFID, etc.
Monitoring
Animal health monitoring system,forest fire alert, smart irrigation
system, etc.
Medical Devices
Cardiac pacemaker, respirator, oxygenator, inspection devices,
monitoring devices, infusion pump, etc.
Marine & Lifesaving
Life jacket, signal light, buoy, etc.
Oil & Gas
Well pressure meters, float meters, logging while drilling(LWD),
measure while drilling(MWD), etc.
Military & Defence
Portable radio communications, night vision equipment & thermal
images, torches & lamps, etc.
Our products have exported worldwide and won the trust of all, we are striving for the credibility and honor of MADE IN CHINA products.
As a company seeking perfection continuously, we have strict requirements for management. The company has been awarded with OHSMS18000, ISO9001 international quality management system certificate and ISO14000 environmental management system certification. At the same time, as a company present in the extensive international market, HaoCheng has also received the CE product safety certification in EU to ensure the safety of our products exported to EU. Besides, HaoCheng has also been awarded with RoHS environmental certification in EU. Our products have passed the test for hazardous substances, thus proving the environmental features of the products. Meanwhile, because the international market has very critical requirements for shipping, we have been awarded with the UN safe shipping certification of US. Besides, our products have also received the UL American products access certification, which is necessary for all products to enter markets in developed nations such as US.
We have the automatic equipment taking the leading position in
China, the fully-automatic lithium manganese coilers (the most in
China), lithium automatic production line and laser welder imported
from Germany (we used to be the sole Chinese producer having the
equipment. Only in recent years, our Chinese competitors began to
import such equipment). The price of this laser welder is
equivalent to that of a whole
lithium automatic production line. We have invested heavily to buy
it because the laser welder only spends 0.7 seconds to weld one
battery. It is well known that the ordinary argon arc welder takes
a longer time (about 4 seconds). At the same time, the high
temperature in the welding would impact on the internal structure
in the battery. However, the laser welding greatly reduces the time
of heat conducting, thus reducing the
impact on the battery quality in the process of welding. At the
same time, the highly-automatic production equipment considerably
improves the consistency of batteries, thus ensuring the batch
supply of products.
HaoCheng Industrial Park has the professional solutions to stand-by emergency power source. By taking our own advantages, we can guarantee the constant supply of power in critical moments. We have designed IDC-level (data center) emergency stand-by power source solutions for the factory, which is equipped with the self-produced Super Power 530kw diesel power generating unit. In the early stage of factory design, we use the 1+1 double transformer configuration to ensure the constant power supply for production at high cost. As is known to all, dry environment is very important in the process of manufacturing lithium batteries. The moisture will impact on the quality of batteries.
HaoCheng Industrial Park is equipped with 3+1 independent drying and moisture-eliminating system and lithium manganese, lithium thionyl and soft package sets. When one machine breaks down, the battery production will not stop. The drying and moisture-eliminating system of the original HaoCheng company has now become the spare part in the Industrial Park to ensure the lithium battery production is always done
in the wonderful dry environment.
With Experience of 24Years
And Wisdom of 600 Persons
We Do only One Thing