
THE OFF, ON, and SETUP MODES
The KEEPGUARD WIRELESS CAM has three basic operational modes:
OFF Mode
The OFF mode is the "safe" mode when any actions must be taken,
e.g. replacing the SD card or batteries, or transporting the
device. You will use OFF mode if you connect the camera to a
computer′s USB port to download your photos/videos.
ON Mode
Once in ON mode no manual controls are needed or possible (the
control keys have no effect). The KEEPGUARD WIRELESS CAM will take
photos or videos automatically (according to its current parameter
settings) when it is triggered by the PIR sensor′s detection of
activity in the area it covers.
SETUP Mode
In the SETUP mode you can check and change the settings of the
KEEPGUARD WIRELESS CAM with the help of built-in LCD. Moving the
power switch to the SETUP position will turn on the LCD display and
you will see an information screen.
SETUP Mode Shortcut Keys
1.First switch to the SETUP Mode.
2.Press MENU button.
3.Press RIGHT or LEFT key scrolls to the next or previous
parameter.
4.Press UP or DOWN key to select setting for the currently
parameter.
5.Press OK to save the new setting.
Then switch to ON Mode to take photos or videos.
Wireless Setting Parameters Guide
The camera provides two solutions, i.e. MMS or SMTP, to send the
pictures to cell phone and email box.
MMS
If MMS is selected, pictures will be sent to the preset phone
(maximum 5 numbers allowed) or email (maximum 5 addresses allowed)
or both phone number and email address.
1.Auto setting
a)Country:Choose your Country or Origin in the drop down menu
b)Provider Select:Choose your provider in the drop down menu
2.Manual Setting
If the Country or Provider’s information is not included in the
“Auto Setting”, you must select “Manual Setting” and set the
parameters for the URL, APN, IP and Port according to the settings
the service provider makes available, please contact network
service provider if you are not familiar with these settings.
3.Phone No
Enter up to 5 different phone numbers in the Phone NO field. You
will need to start every phone number with no spaces or dashes.
4.Email Address
Enter up to 5 different e-mail addresses in the Email field.
SMTP
If SMTP is selected, pictures will be sent from one preset sending
email address to one or multiple email addresses via GPRS/HSPA
network using the SIM card data plan.
1.Auto setting
a)Country:Choose your Country or Origin in the drop down menu.
b)Provider Select:Choose your provider in the drop down menu.
2.Web Mail: Choose a Web Mail you used as a sending email, it will
auto-fill the APN,Server,and Port in the Manual Setting.
3.Manual Setting: If the Country, Provider or/and WebMail’s
information are not included in the “Auto Setting”, you must select
Manual Setting and set the parameters.
4.Email Address: Choose this option if you only want the photos
sent to chosen e-mail addresses.Enter up to 5 different e-mail
addresses in the Email field.
WIRELESS TESTING
After you finish the MMS or SMTP Setting, you can make a “Wireless
Testing” for KG870NV.
1.Send a test photo
1)Put the power switch in SETUP position to enter the preview
screen, set the camera in Camera Mode.
2)Press the LEFT key to take a picture after the camera has
searched the mobile signal.
3)The LCD screen will show a step bar. Once it displays “Wireless
test over, Send Success”, you have successfully sent your first
photo and your camera is ready to take Photos.
2.Send a command code
1)Put the power switch in SETUP/ON position to enter the preview
screen.
2)Use the Command Phone send a code #140#, the camera will take a
picture after the camera has searched the mobile signal.
3)The LCD screen will show a step bar. Once it displays “Wireless
test over, Send Success”, you have successfully sent your first
photo and your camera is ready to take Photos.
Timed Scan
Timed Scan is a revolutionary new feature for the KEEPGUARD
WIRELESS CAM, which allows you to monitor your food plots or field
edges with time lapse images or video. the “time lapse” has been
enhanced with the addition of the option for a second block.
Time-Lapse Technology automatically captures images at preset
intervals of one minute to 60 minutes, within the time frame you
select (ex: 6:00 A.M. to 11:00 A.M.). Timed Scan 2x offers the
unique ability to select two time frames for field scan (for
example: 6:00 A.M. to 11:00 A.M. and 2:00 P.M. to 5:30 P.M.). This
allows you to monitor dawn and dusk movement on your favorite food
plot.
COORDINATE INPUT
After selecting the Coordinate Input parameter,press UP or DOWN to
select the ON setting and press OK.
The Latitude and longitude for any location where you plan to place
the camera can be obtained at many websites, for example:
http://itouchmap.com/latlong.html.
You can enter a nearby street address, just zip code,or use the
various types of maps to locate the opproximate position.The format
you will need to use to enter the coordinates in the KG780NV menu
screen is shown below:
KG870 Technical Specifications
Image Sensor | 5 Megapixel HD Color CMOS |
Lens | f=7.36mm F/NO:3.2 FOV=55°; Auto IR-Cut-Remove (at night) |
IR-Flash Range | 20m-25m; 32 LEDS |
Display Screen | 2.4 inch Color Display |
Image Format | 4:3(Full Screen) or 16:9(Wide Screen) |
Memory Card | SD or SDHC Card, Maximum capacity 32GB |
Image Size | 12MP(4000×3000);8MP(3264×2448);5M(2592X1944);3M (2048X1536) |
Video Size | 1920*1080P |
PIR Sensitivity | PIR with 3sensitivity levels:High/ Normal/ Low |
Operation | Day/Night |
Response Time | < 0.6 s |
Triggering Interval | 1sec-60min programmable |
Shutter Speed | 1/10-1/2000sec. |
Shooting Numbers | 1-3 programmable |
Video Length | 5-60sec. programmable |
Power Supply | 12×AA recommended;6×AA as emergency power |
Stand-by Current | <0.28mA |
Power Consumption | <200mA(+600mA when IR-LED Lighted) |
Timed Scan | programmable |
Temperature Display | programmable |
Password | programmable |
Image Recycle | programmable |
Camera Name | Input |
Moon Display | programmable |
Audio Video | programmable |
MMS Mode | Instant/ Fixed time |
MMS Function | On/ Off |
Send to Mobile Phone | 1-5 phone number programmable |
Send to Email | 1-5 Email address programmable |
User Interface | LCD display |
Interface | USB;SD card holder; 9V DC external |
Security | Strap |
Operating Temperature | -20-60℃(Storage temperature:-30-70℃) |
Operating Humidity | 5%-90% |
Security Authentication | FCC/CE/RoHs/WEEE |
Dimensions | 157*118*77mm/675g |
KEEPWAY INDUSTRIAL ( ASIA ) CO.,LTD
Keepway Industrial ( ASIA ) CO.,LTD set up in 2003, is a coalition of independent development of hardware and software, industrial design, mold stamping, SMD assembly together, focusing on sales of digital video products and consumer electronics. The most experienced and technological innovation capability of enterprises, we mainly undertake hunting cameras, bird-watching cameras, garden cameras, sports Bluetooth headset, night vision, traps and other products of the hardware and software development, production and after-sales service.
Since its inception, the enterprise has been in a rapid and healthy development track, and has set up Hong Kong office as a market development and sales operations center and Shen Zhen Office as a research and development production center. We have more than 6,000 square meters of manufacturing plants and more than 1,000 square meters of research and development management center.
After more than 16 years of development, all have achieved good results. The formation of a unity and pragmatic, pioneering and innovative R&D and marketing teams makes our products exported to more than 20 countries in Europe and the United States. Especially in product software development, wireless technology, image algorithms, lens design, night vision technology, we have a major breakthrough. In the professional technical knowledge and advanced innovative ideas, we have successfully developed a variety of high-end consumer digital products. And through continuous innovation, company access to dozens of patents, in 2014 successfully achieved a national high-tech enterprises eligible.
Enterprises will be adhering to the "integrity, quality, win-win" principle, and establish long-term good partnership with customers around the world, joining hands in creating a better future.
Our advantages:
1, professional, focused, more selective.
2, a leading research and development team, guaranteed quality,
good service.
3, internal process reaction speed is fast, staff cohesion is
strong.
We have 21 years of OEM/ODM expertise and receive OEM/ODM order,Welcome!